You need to sign in or sign up before continuing.
The PoolWarden water chemistry controller is available as a standalone controller without any sensors or flow cells, with flow cells and sensors, and pre-mounted to help make installation easier and more consistent. When the sensors are included the BNC cables are also included with the sensors. The warranty on controllers is 5 years and 1 year on sensors and flow cells.
|
PoolWarden S Single pool controller without sensors or flow cell. When replacing an aging pool controller that already has sensors and a flow cell the PoolWarden S is the controller only solution. Will work with most existing chemical sensors and flow sensors. If you will be measuring temperature you will most likely need the PoolWarden temperature sensor as it is a NTC 10k thermistor. List price $640.00 |
|
|
|
|
PoolWarden SFC Single pool controller with sensors and flow cell. Includes an acrylic flow cell for the water sensing bypass, ORP, pH, temperature and a flow sensor. The flow sensor is a magnet in-line with the water inlet to the flow cell that will rise and trigger the sensor when there is flow. The sensors cables are 10 feet allowing the flow cell to be mounted up to 9 feet away from the PoolWarden. Includes fittings for the flow cell to connect to 1/2" hard vinal tubing and an in-line water filter. List price $1360.00 |
|
|
|
|
PoolWarden SMTD The PoolWarden S pre-mounted on a 24" tall by 19" wide 3/8" thick white backboard. The flow cell, temperature sensor, fittings, and flow switch are all pre-installed. Simply hang the backboard on the wall, plumb in the water in and out to the flow cell, install the pH and ORP sensors and turn it on. The sensor cables are all 3 feet because the flow cell is very close to the PoolWarden. List price $1479.00 |
|
|
|
|
PoolWarden D Two pool controller without sensors or flow cell. When replacing two aging pool controllers that already have sensors and flow cells the PoolWarden D is the controller only solution. The existing controllers must be located near each other for the existing sensor cables to reach the PoolWarden D. Many pools also have a spa and the PoolWarden D allows for a single controller to take care of the water chemistry of both. List price $720.00 |
|
|
|
|
PoolWarden DFC Two pool controller with sensors and flow cells. Includes 2 each of acrylic flow cell for the water sensing bypass, ORP, pH, temperature and a flow sensor. The pH and ORP sensors are left with their protective boots to keep them moist until installation. List price $1360.00 |
|
|
|
|
PoolWarden DMTD The PoolWarden D pre-mounted on a 24" tall by 24" wide 3/8" thick white backboard. The flow cells, temperature sensors, fittings, and flow switches are all pre-installed. Simply hang the backboard on the wall, plumb in the water in and out to the flow cells, install the pH and ORP sensors and turn it on. The sensor cables are all 3 feet because the flow cell is very close to the PoolWarden. Can also be plumbed with both flow cells measuring the same water providing sensor redundancy. List price $2136.00 |
|
|
|
|
Typical all liquid installation using 4 feed pumps and a PoolWarden DMTD. This one has an Ethernet connection with a static IP.
|
 |
ControlOMatic © 2005-2012 Grass Valley, California 530-205-4520 |
powered by Ruby on Rails Newsletter: Subscribe - Unsubscribe |
 |