PoolWarden Pool and Spa Chemical Controller

The PoolWarden is the most advanced single and multiple pool chemical controller available, providing the ultimate in pool and spa chemical automation. There are up to 6 dry contact output relay providing control for pH, sanitizer, heaters, pumps and alarm outputs. The easy to read 80 character display with back-light and 16 button keypad makes setting up the PoolWarden quick and easy. Setup wizards are included for standard types of control including acid, base, cal-hypo, erosion feeders, salt systems, heaters and more.


PoolWarden Features

  • Chemical automation for 1 or 2 bodies of water (2 pools, 2 spas, or a pool and spa).
  • Includes Temperature sensing
  • Programmable pH, ORP and temperature setpoints.
  • Proportional feed for precise chemical control with minimal overshoot. The proportional feed percentage is also adjustable
  • Each relay has a wizard for configuration making setup a snap.
  • 80 Character display with back light.
  • 2 Levels of password protection and a lockable enclosure.
  • 16 Button keypad for easy value entry.
  • Includes real time clock with both the time and date.
  • Designed to work with salt chlorine generators.
  • Control options include programmable feed on and off times, proportional control and over-feed limits
  • 3 Dry contact relays for the single pool model, 6 dry contact relays for the dual pool model. Relays can be connected to 110 VAC internally, or other voltages when supplied externally.
  • Separate alarms for both pools on the dual pool controller model.
  • Programmable manual feed mode.
  • All relays disable for when the pool is being serviced.
  • Keeps track of daily and monthly relay on time allowing for tracking chemical usage.
  • The optional WIFI adds the following features.
  • The Aux relay can be setup for heater control, super-chlorination, alarm out and pump control.
    • Service access PIN codes. The PoolWarden will log a timestamp of when the PIN code was entered.
    • Data recording using the www.poolwarden.com data service, minimum data interval is every 15 minutes.
    • Main operational software updating.
    • Direct connect using PoolWarden.exe.
    • WIFI Supports DHCP, static and dynamic IP and router security.

PoolWarden Specifications

  • ORP: 0 to 999 mV
  • Temperature: 0 to 50 °C. 32 to 120 °F.
  • pH: 4.2 to 9.8
  • Input voltage: 110 VAC, 10A fuse
  • Enclosure: 8”x8”x6” with hinged list and locking latch.

PoolWarden Flow Cell

  • Built in turbine digital sensor indicates flow rate
  • Inlet and Outlet valves
  • Water sample port
  • Clear acrylic flow cell allows for easy inspection
  • Flow cell dimensions: 4” x 2.25” x 1.25 thick
  • Stainless steel encased NTC temperature sensor
PoolWarden D two pool and spa water chemistry controller PoolWarden SMTD and spa water chemistry controller PoolWarden DMTD pool and spa water chemistry chemical controller
Controllers
WIFI and Ethernet
Communcation Examples
Data Service
Wizards
PoolWarden Manual
PoolWarden Flyer
Photo Gallery

Other Information
ORP
Why Automate
Cynuric Acid CYA
Controller Evolution
Aqua Balance